Where to Buy

The Sony WF-1000XM3 is available on:

Introduction

The Sony WF-1000XM3’s predecessor, the WF-1000X, did not receive good reviews when it launched in 2017. Rightfully so. The WF-1000X was Sony’s first foray into the true wireless (TWS) market and it has issues that are common to first-gen products – unstable connection, average battery life, and a less than stellar noise cancellation capability. Sony’s answer was to take in all the feedback, improve upon them, and gave the product an even clumsier naming convention. Thus, the Sony WF-1000XM3 was born. So how did it fare? Are there really no downsides to it? Let’s find out.

Case

Battery

Battery Life: 12 hrs Connector: USB-C Wireless Charging: No

Even though the amount of battery capacity is not stated, the bulkiness of the case does give us some hints on the amount of battery juice packed in it. Anything less than 10hrs would have been disappointing. The TWS also has a modern feature of a USB-C charging port but sadly for the price range, there is no wireless charging.

UX

Can be open easily with one hand: Yes Pass the shake test: Yes Light Indicators: One light indicator on the front of the case

The case is well designed. The rounded body makes it really nice to touch and carry. The cover opens easily and can stay in place while open. It makes a nice magnetic thud when shut. I like the way the charging port is positioned, right where the rounded portion of the case is. The case can stand perfectly upright while charging, with the light indicator visible. You can also easily unplug the charging cable since it is situated right at the top in the “standing charging” position. The light indicators are confusing and give very little data (charging state, battery low). Without the manual, I have no clue as to what is going. I’m guessing Sony is relying on software (they have an accompanying Sony Headphones Connect mobile application) to display more granular data to the user. If you have fat fingers like mine, you will find it slightly tricky to take the earbuds out of the case. This happens especially when both earbuds are in the case. It leaves only a small gap for the fingertip to “dig” the earbuds out.

Design

Material: Plastic Build Quality: Good

The bulk of the case is made from plastic. However, the plastic that is used for the cover and the body frame is different. The body uses a nice rubberized plastic material that gives a smooth, premium feel to it. The rounded bottom design is a refreshing take on the form factor of the charging case, but it is not really aesthetically pleasing to my eyes.

Portability

Weight: ~96g (With earbuds inside – 8.5g each) Volume: 6.5 x 4.5 x 2.4 = 73.44cm cu (~4.4816 in cu) Portability: Average

The charging case feels like a rock on my hand that can potentially double up as a self-protection weapon.

Earbuds

Battery

Battery Life: 4 hrs (with NC on) Charge Time (15mins): 40 mins playback time

The battery life of the earbuds has decent battery life at 4 hrs when the noise cancellation (NC) is on and 4.5 hrs while NC is off. The charging speed is terribly slow. It takes 1.5 hrs to fully charge the earbuds.

UX

Control Mechanism: Touch Touch Accuracy: Good Control Symmetry on both earbud: Depends on configuration Mono Use: Yes (Both sides) Cannot on/off Controls on the left and right earbud can be configured

The touch control of the WF-1000XM3 is implemented well in terms of responsiveness and hit accuracy. There is a circular flat surface that indicates the location of the touch sensor. This makes it intuitive for you to know if your fingers are landing on the right position. In terms of functionality controls, the Sony Headphones Connect app allows the control to be configurable across both the earbuds. I recommend choosing “Volume Control” for the left earbud and “Playback Control” for the right earbud.

Design

Profile: High Material: Plastic, rubber, metal Comfort: Good Fit: Average

The elongated shape of the earbuds gives off a “headset” kind of a vibe. It also has a high profile when worn and that’s why I can easily spot someone wearing the WF-1000XM3. This could be a positive or negative point for you, depending on how flamboyant you are. The earbuds are comfortable to wear and don’t drop out when I shake my head vigorously. However, I always felt like the earbuds don’t fit as snugly as other TWS such as the Jabra 75T or Samsung Galaxy Buds.

Mic

Noise Cancellation: Average Voice Pick-up: Good

The mic does pick up a considerable amount of background noise but the voice pick-up is really good. Despite the bustling background, my voice still sounds clear and the volume is audible.

Sound

Driver: 6mm CCAW Dynamic Driver Active Noise Cancellation: Average Sound Signature: Flat Sub-bass: Bad Bass: Average Mids: Good Treble: Good Sound Detail: Average

I’m comparing the WF-1000XM3 with two other similar active noise-canceling TWS (but with way saner names):

Active Noise Cancellation

I think the ANC capability is decent. It doesn’t come close to what over-ear ANC headphones like the Bose 700 or WH-1000XM4 offers but it does quiet down the low droning ambient sound noticeably. I find that the Jabra 75T’s ANC effect is stronger than the WF-1000XM3.

Overall sound quality

The WF-1000XM3 has a flat sound signature where the sound is kept mostly natural without any major tweaking or emphasizing of the frequency range. Despite having a mild sub-bass, the overall bass performance still is decent with the tightness and impact. The mids is where I think the WF-1000XM3 truly shines and it complements well with the bass and the treble.

Bass

The sub-bass on the WF-1000XM3 is dismal and you can barely feel it. Both the 75t and the Galaxy Buds Live beat Sony hands down in the sub-bass department. Surprisingly, the bass on the Sony wasn’t too bad. It was tight and articulate, unlike the Galaxy Buds live which sounded a little boomy for my taste. The WF-1000XM3’s bass impact is noticeable but the 75t moves more air than the Sony.

Mids

I really enjoyed the mids on the WF-1000XM3. I can’t find any major flaws with the vocals. They sounded clear with no coloration. Both the 75t and Galaxy Buds are on par with the Sony on the general mids performance. The part where the WF-1000XM3 shines slightly more than the two is how the bass plays with the mids. As the Sony IEM has a less emphasized bass, the mids stand out more with less distraction, giving a more forward presentation.

Treble

The treble on the WF-1000XM3 has a good amount of control on when it should shine and when it should hold back. The upper treble is where Sony has done a much good job of bringing out the excitement without being overly bright. The 75t, in comparison, was a little more aggressive in smoothing the upper treble which reduces the overall enjoyment.

Connectivity

Audio Codec: SBC, AAC Bluetooth Version: 5.0 Auto-connect when: Taken out of case

Average drop-outs in an hour: 1 – 2 times

Multi-point connection: No

As a flagship Sony product, I’m surprised that the TWS doesn’t come with LDAC support. Apparently, it was revealed in an interview that the company wanted to prioritize battery life while balancing sound quality, hence, the exclusion of the LDAC codec. They also claimed to be using a special processor chip – QNe1 that does not include the usual aptX support from Qualcomm TWS technology. In general, the Bluetooth connection is very stable and the pairing is a breeze. The only disappointment here is the lack of a multi-point connection. You can find other TWS at the same price bracket (Jabra 75t etc) that already offer such a feature.

Waterproof

IP Rating: NA

No IP rating provided by the manufacturer and I wouldn’t recommend it for any exercises due to the fit of the earbuds.

Software

Manual EQ + Preset 360 Audio Ear Analysis Granular Noise Cancellation No “Find my Earbuds” feature

The amount of configuration that the Sony Headphones Connect app allows you to do is impressive. Other than the EQ presets give, you can manually tweak the EQ and save them as a profile. You can also select the level (20 steps) of active noise cancellation (ANC) that you want. The lower the value, the stronger the ANC effect. As mentioned above, you can also configure the functionalities of each earbud individually. Too bad, the on/off function is not included. It has 3D sound support (360 Audio Ear Analysis) where you are supposed to take a snapshot of your ears and the app will project the sound in a 3d space, giving you a very wide soundstage. This is effectively the same technology that was pioneered by the Creative SXFI.

Lacking the “Find My Earbuds” feature

The only downside is that there is no Find My Earbuds feature where you are able to track the last position of the earbuds.

Review  Sony WF 1000XM3   Back With a Vengeance - 36Review  Sony WF 1000XM3   Back With a Vengeance - 23Review  Sony WF 1000XM3   Back With a Vengeance - 68Review  Sony WF 1000XM3   Back With a Vengeance - 77Review  Sony WF 1000XM3   Back With a Vengeance - 14Review  Sony WF 1000XM3   Back With a Vengeance - 6Review  Sony WF 1000XM3   Back With a Vengeance - 39Review  Sony WF 1000XM3   Back With a Vengeance - 6Review  Sony WF 1000XM3   Back With a Vengeance - 62Review  Sony WF 1000XM3   Back With a Vengeance - 37Review  Sony WF 1000XM3   Back With a Vengeance - 65Review  Sony WF 1000XM3   Back With a Vengeance - 29Review  Sony WF 1000XM3   Back With a Vengeance - 89Review  Sony WF 1000XM3   Back With a Vengeance - 89